H&R lowering springs and TRAK+ wheel spacers for the new Audi RS5

Few cars are faster than the new Audi RS5 – but none are faster than H&R! The suspension specialists from Lennestadt now offer some options for a more individual RS5 set-up, for fitting both the Saloon and the Avant.

H&R height adjustable springs and H&R lowering springs are available as of now, making the Ingolstadt-built supercar even sharper than it already is. Incidentally, with both products, the standard dampers remain fitted, meaning all the suspension’s control functions remain fully active.

The H&R height adjustable springs allow for variable lowering of the vehicle’s centre of gravity between approx. 25 and 35/40 millimetres and are the first choice for fully customised tuning.

The ‘standard’ H&R lowering springs, on the other hand, provide a fixed lowering of between 25 (front) and 35 (rear) millimetres, whilst naturally also optimising the clearance between the wheel and the edge of the mudguard. Both products deliver more direct steering response and reduced body roll and are suitable for fitting to both the saloon and the Avant.

Optionally, H&R Trak+ wheel spacers made from high-tensile aluminium ensure a taut wheelbase. Available in either silver or black anodised finishes, they allow both standard and aftermarket wheels to be aligned with millimetre precision against the fender edges.

In the case of leased vehicles, all H&R suspension upgrades can, of course, be removed without leaving any traces should the lessor require the vehicle to be returned to its original condition.

As is customary with H&R, all products have been granted a type-approval certificates (TTG) and are Made in Germany!

Further information is also available on H&R’s social media channels:

FACEBOOK ➤ https://www.facebook.com/hrspezialfedern
INSTAGRAM➤ https://www.instagram.com/hrspezialfedern
YOUTUBE    ➤ https://www.youtube.com/user/hrspezialfedern

H&R suspension components for the Audi RS5, Type FU (B10)
2.9 V6 plug-in hybrid quattro, 4WD, from model year 2026

Height adjustable springs for saloon/sedan + Avant
Part no.: 23041-1
Lowering: Front approx. 25–35 mm / Rear approx. 25–40 mm

Lowering springs for the sedan/saloon
Part no.: 28495-1
Lowering: front approx. 25 mm / rear approx. 30 mm

Lowering springs for the Avant
Part no.: 28495-2
Lowering: front approx. 25 mm / rear approx. 35 mm

Trak+ wheel spacers, silver or black anodised
Widening: from 8 mm (per wheel)

______________________________

Contact for press enquiries:

Mediaart GmbH
Kommunikation & Design
Harry Hoffmann
Kirchstr.57
45699 Herten
Tel.:02366/37226
[email protected]