Electric power redefined: Tesla Model Y with H&R height adjustable springs

The Tesla Model Y’s impressive longitudinal dynamics, which deliver breathtaking acceleration depending on the engine variant, are already almost legendary. But when it comes to cornering, H&R height adjustable springs can offer the decisive advantage in terms of driving pleasure.

What makes them special is that the resulting lowering can be variably adjusted, whilst the standard shock absorbers remain fitted. The lowered centre of gravity ensures more direct steering response, and the body roll of the rather tall body is noticeably reduced in fast corners. Yet payload capacity and ride comfort remain at standard levels.

Visually, the reduced ground clearance perfectly emphasises the dynamic appearance of the mid-size SUV. Furthermore, H&R height adjustable springs are compatible with all Tesla Model Ys from 2020 onwards, including facelift models!

Optionally, H&R Trak+ wheel spacers made from high-tensile aluminium ensure a taut wheelbase. Available in either silver or black anodised finishes, they allow both standard and aftermarket wheels to be aligned with millimetre precision against the fender edges.
In the case of leased vehicles, all H&R suspension upgrades can, of course, be removed without leaving any traces should the lessor require the vehicle to be returned to its original condition.
As is standard with H&R, all products are supplied with the necessary part certificates (TTG) and are Made in Germany!

Further information is also available on H&R’s social media channels:
FACEBOOK ➤ https://www.facebook.com/hrspezialfedern
INSTAGRAM➤ https://www.instagram.com/hrspezialfedern/
YOUTUBE ➤ https://www.youtube.com/user/hrspezialfedern

H&R suspension components for Tesla Model Y, 2WD/4WD, Type 003/005, including facelift, incl. adaptive dampers, from model year 2020

Height adjustable springs for pre-facelift models, 4WD, from model year 2020
Part no.: 23038-3
Lowering: Front approx. 40–50 mm / Rear approx. 40–50 mm

Height adjustable springs for facelift models, 4WD, from model year 2025
Part no.: 23038-3
Lowering: Front approx. 30–40 mm / Rear approx. 50–60 mm

Height adjustable springs incl. facelift, 2WD, from model year 2020
Part no.: 23038-1
Lowering: Front approx. 40–50 mm / Rear approx. 40–50 mm

Trak+ wheel spacers, silver or black anodised
Widening: from 20 mm (per axle)

_______________________

Ansprechpartner für Presseanfragen:

Mediaart GmbH
Kommunikation & Design
Harry Hoffmann
Kirchstr.57
45699 Herten
Tel.:02366/37226
hh@mediaart-werbung.de